Sulfer Analyser(XRF) Energy Dispersive X-ray Fluorescence (EDXRF)
for non-destructive elemental analysis of sodium (Na) through uranium (U) depending on setup |
 |
Type : NEX QC
- 50kV X-ray tube
- 4W max power
- 6 tube filter positions
- High performance SDD detector
- Peltier thermo-electric cooling
- Si PIN Diode Detector
|
 |
Type : NEX QC+
- 50kV X-ray tube
- 4W max power
- 6 tube filter positions
- High performance SDD detector
- Peltier thermo-electric cooling
- Si Drift Detector
|
 |
Type : NEX QC+QuantEZ
- 50kV X-ray tube
- 4W max power
- 6 tube filter positions
- High performance SDD detector
- Peltier thermo-electric cooling
- Si Drift Detector
- Standardless FP with user configurable matching libraries
|
 |
Type : NEX DE
- 60kV X-ray tube
- 12W max power
- 7 tube filter positions
- 10 mm collimator
- High performance FAST SDD detector
- Peltier thermo-electric cooling
- Fast Si Drift Detector Standardless FP
- Standardless FP with user configurable matching libraries
|
 |
Type : NEX DE VS
- 60kV X-ray tube
- 12W max power
- 7 tube filter positions
- 10, 3 and 1mm diameter collimator
- High performance FAST SDD detector
- Peltier thermo-electric cooling
- Fast Si Drift Detector
- High Resolution Camera
- Standardless FP
|
 |
Type : NEX CG
- X-ray tube with Pd anode
- 50W max power
- 50kV max voltage
- Four standard polarization and secondary targets depending on application, for optimum excitation
- Optional fifth target for optimal excitation of Na and Mg
- High performance SDD
- Peltier electronic cooling
- High performance SDD Detector
- Helium purge
- 16-position sample tray
- Standardless FP
|
 |
Type : Trace SN cube
- temperature combustion in the carrier gas at up to 1,150 °C
- The instrument’s CLD and UV-fluorescence detection methods
- Detection limits are set at 6 ppb for S and 15 ppb for N
- injection volume of 20 µl for liquids or 20 ml for gas samples
|
 |
Type : vario MACRO cube(CHNS)
- Quantitative sample digestion at up to 1,200 °C, or 1,800 °C
- Spanning from micro (<1 mg) to macro (800 mg soil)
- up to 20 mg of organic matter
- Up to 40 mg C abs, or 15 mg N abs, from ppm to 100%
|